|
Product Details:
|
| Product Type: | PP Strap Making Machine | Haul Off Drive: | High-Speed Motor |
|---|---|---|---|
| Raw Material: | PP Polypropylene New Material | Output Capacity: | 100-340 Kg/h |
| Number Of Strands: | 6 Straps | Strap Width Range: | 5-19mm |
| Strap Thickness Range: | 0.4-1.2mm | Control System: | PLC |
| Voltage: | 380V 50Hz 3 Phase, Customizable | Warranty: | 12 Months |
| Highlight: | IE3 VFD drive strap extruder,Zone PID barrel heating line,Low power PP strap extrusion |
||
DESCRIPTION OF PP STRAP MAKING MACHINE:
PP STRAP MAKING MACHINE /PP strapping production equipment is a high-speed extrusion machine using 100% PP (polypropylene) fiber-grade raw materials. It can produce PP strapping with a width of 5-19mm.
Raw Materials------ The equipment can use virgin polypropylene (PP) granules or recycled materials to produce strapping, meeting the production needs of different customers and ensuring uniform color and stable performance of the strapping.
1.Raw materials-----PP strapping equipment can produce plastic raw materials:
100%recycled materials or PP polypropylene new materials to produce strapping belt;
2.Screw-----The equipment adopts high-precision high-quality screws, adopts well-known brands, and has unique parameter design. It has the advantages of large extrusion volume, good plasticization, high hardness and wear resistance; equipped with a quantitative extrusion system, the width and thickness of the produced belts are the same, the error range is small, and it meets the national strapping belt acceptance standards;
3.Automatic screen changer------Equipped with a non-stop automatic screen changer, the screen does not need to be stopped, and the efficiency is maximized. 4-net circulation large-area filtration does not require frequent screen changes.
4. PLC system----The equipment adopts an intelligent PLC Chinese/English version control system, which is simple and easy to understand, beautiful and generous, sturdy and durable, long life, and low failure rate. The equipment has an exclusive parameter memory system, which can store data after each specification is produced, and the parameters can be directly adjusted during the next production.
5.Oven----Constant temperature intelligent oven, with multiple heating tubes inside, uses electricity to generate heat energy, reaches the set temperature, and automatically stops heating, with low power consumption and less loss.
6.Winding machine----can be matched with automatic winding machine (automatic roll changing, automatic tape cutting, automatic stop), servo motor control, no manual operation required.
PP STRAP MAKING MACHINE PROCESS FLOW:
TECHNICAL SPECIFICATION
|
PP-2 |
PP-4 |
PP-6 |
PP-8 |
PP-10 |
PP-12 |
|
|
Raw material |
PP polypropylene new material/recycled material |
|||||
|
Number of tapes |
2 |
4 |
6 |
8 |
10 |
12 |
|
Width(mm) |
5-19 |
5-19 |
5-19 |
5-19 |
5-19 |
5-19 |
|
Thickness(mm) |
0.4-1.2 |
0.4-1.2 |
0.4-1.2 |
0.4-1.2 |
0.4-1.2 |
0.4-1.2 |
|
Line speed(m/min) |
≧260-300 |
|||||
|
PLC control system |
PLC |
PLC |
PLC |
PLC |
PLC |
PLC |
|
Screw Model |
90 |
110 |
125 |
135 |
135 |
135 |
|
Reducer model |
200 |
220 |
250 |
280 |
280 |
280 |
|
Winding machine |
Automatic winding machine /Semi-automatic winding machine |
|||||
|
Screen Changer |
Automatic/Manua |
|||||
|
Production capacity 24H |
2.5-3T |
6-7T |
8-9T |
10-11T |
12-13T |
13--14T |
The main components of PP strapping equipment:
Feeder---- transfer PP raw materials into the machine.
Extruder----heat and melt the PP raw materials and extrude them into shape.
Molding mold---- make the molten PP belt embryo pass through the mold to form a strip.
Cooling water tank----cool the extruded PP belt embryo to ensure its shaping.
Tractor----pull out the cooled strapping belt to maintain a stable production speed.
Oven---- heat the strapping belt to improve its strength and toughness.
Embossing machine---- emboss the surface of the strapping belt to increase friction and prevent slipping.
Shaping oven----heat again, shape, and make the PP belt more standardized.
Reeler---- reel the strapping belt into rolls for easy storage and transportation.
ABOUT AFTER-SALES
We provide comprehensive technical support and service for our PP Strap Making Machine. Our team of experienced technicians can provide a variety of services, including:
Pre-sales:
1.Layout plan of PP belt making machine.
2.Analysis of the cost of PP strap making machine.
3.Raw materials that can be used for PP strap making machine.
After-sales service:
1.Water and electricity circuits of PP strap making machine, circuit drawings, etc.
2.Installation, commissioning and training of PP strap making machine.
3.Maintenance service of PP strap making machine.
4.Regular maintenance and repair
5.Troubleshooting and diagnosis
6.Software updates and upgrades
![]()
FAQ:
Q: What are the specifications that the PP strapping production line can produce?
A: Width: 5-19mm, thickness: 0.3-1.2mm.
Q: What's the price of this machine please?
A: We have different extrusion capacities and different models, and the corresponding prices are also different.
Q:Can the length of the PP strapping production line be customized?
A: YES
Q:What is the transaction method of PP strapping production line?
EXW ,FOB,CIF
Contact Person: Lily
Tel: +8613922883873
Fax: 86-0755-88219285
Overall Rating
Rating Snapshot
The following is the distribution of all ratingsAll Reviews