|
Product Details:
|
| Name: | PP Packing Belt Production Equipment | Width: | 5-19mm |
|---|---|---|---|
| Thickness: | 0.6-1.2mm | Metering Pump: | 50CC |
| Number Of Tapes: | 2-12 Straps | Frequency Converter: | 37-45kw |
| Main Motor: | 37-45kw | Control Mode: | PLC Control |
| Production Capacity: | 100-300KG/ H | Operator: | 4 People |
| Screw: | Double Screw/Single Screw | Line Speed: | 100-300m/minute |
| Highlight: | Automatic Screen Changer PP Strapping Production Line,PLC Control PP Strapping Machine,100-300KG/H Production Capacity PP Packing Belt Production Equipment |
||
DESCRIPTION OF PP STRAP MAKING MACHINE:
PP strap making machine &PP strapping belt production line is a high-end intelligent extrusion equipment that can produce PP strap: width: 5-19mm, thickness: 0.3-1.2mm
1.Raw materials-----PP strapping equipment can produce plastic raw materials:
100%recycled materials or PP polypropylene new materials to produce strapping belt;
2.Screw-----The equipment adopts high-precision high-quality screws, adopts well-known brands, and has unique parameter design. It has the advantages of large extrusion volume, good plasticization, high hardness and wear resistance; equipped with a quantitative extrusion system, the width and thickness of the produced belts are the same, the error range is small, and it meets the national strapping belt acceptance standards;
3.Automatic screen changer------Equipped with a non-stop automatic screen changer, the screen does not need to be stopped, and the efficiency is maximized. 4-net circulation large-area filtration does not require frequent screen changes.
4. PLC system----The equipment adopts an intelligent PLC Chinese/English version control system, which is simple and easy to understand, beautiful and generous, sturdy and durable, long life, and low failure rate. The equipment has an exclusive parameter memory system, which can store data after each specification is produced, and the parameters can be directly adjusted during the next production.
5.Oven----Constant temperature intelligent oven, with multiple heating tubes inside, uses electricity to generate heat energy, reaches the set temperature, and automatically stops heating, with low power consumption and less loss.
6.Winding machine----can be matched with automatic winding machine (automatic roll changing, automatic tape cutting, automatic stop), servo motor control, no manual operation required.
7.Embossing wheel----TEmbossing wheel---The upper and lower patterns are consistent, the lines are clear, the patterns are neat, the embossing is adjustable, the quality is high-end, the material is SKD-11, wear-resistant and durable.
| Model | PP-2 | PP-4 | PP-6 | PP-8 | PP-10 | PP-12 |
|---|---|---|---|---|---|---|
| Raw Material | PP polypropylene new material/recycled material | |||||
| Number of Tapes | 2 | 4 | 6 | 8 | 10 | 12 |
| Width (mm) | 5-19 | |||||
| Thickness (mm) | 0.4-1.2 | |||||
| Line Speed (m/min) | ≥260-300 | |||||
| PLC Control System | PLC | |||||
| Screw Model | 90 | 110 | 125 | 135 | 135 | 135 |
| Reducer Model | 200 | 220 | 250 | 280 | 280 | 280 |
| Winding Machine | Automatic/Semi-automatic | |||||
| Screen Changer | Automatic/Manual | |||||
| Production Capacity 24H | 2.5-3T | 6-7T | 8-9T | 10-11T | 12-13T | 13-14T |
PP STRAP MAKING MACHINE PROCESS FLOW:
① Raw materials → ② Raw material mixing → ③ Raw material pre-drying → ④ Main machine melting of raw materials - extrusion → ⑤ Material blank (strip blank) cooling and shaping → ⑥ Oven heating and shaping → ⑦ Primary stretching → ⑧ Secondary stretching → ⑨ Embossing → ⑩ Oven tempering and shaping → ⑪ Cooling → ⑫ Finished product winding (online printing of fonts is supported)
![]()
![]()
Contact Person: Lily
Tel: +8613922883873
Fax: 86-0755-88219285
Overall Rating
Rating Snapshot
The following is the distribution of all ratingsAll Reviews