PP Strap Making Machine 5-25mm Wide Strapping Band Extrusion Line For Brick Ingot Packing

Wide 5-25mm PP Strapping Band Making Machine for Heavy Loads

PRODUCT OVERVIEW

Bricks, ceramic tiles, aluminium ingots and heavy pallet loads need a wider, stronger band than a carton does. This PP strap making machine is set up for 5-25mm width and 0.35-1.0mm thickness, with two-stage stretching and deep embossing so the band grips the load instead of sliding.

Output is configured around your packing volume, and the line runs on virgin PP granules or clean recycled flakes. Because the strap replaces steel band in most export packing, the finished load is lighter, has no rust risk and needs no edge protection in many cases.

Line Configuration for Wide Heavy Duty Strap

• Quantitative extrusion system: holds width and thickness tolerance so a 25mm band stays uniform along the coil.
• Two-stage stretching: raises tensile strength and lowers elongation for loads that settle in transit.
• Deep embossing unit: SKD-11 roller with adjustable pattern depth for reliable grip on brick and ingot surfaces.
• Tempering oven: constant temperature section reduces brittleness after stretching.
• Servo winding: even coil tension with automatic roll change, so the band feeds smoothly on automatic strapping tools.
• PLC touch screen: separate recipes for 5mm carton band and 25mm heavy band.

Performance of the Wide Strapping Band Line

Advantages for Brick, Ingot and Pallet Packing

• Holds heavy loads: wide band with low elongation keeps a settling brick or ingot stack tight in transit.
• Grip instead of slip: deep embossing keeps the band from sliding on smooth ceramic or metal surfaces.
• Replaces steel band: no rust, no sharp edges, lighter loads and lower freight cost.
• Fewer breakages: tempering after stretching reduces the brittle failures that show up on long sea routes.
• One line, two markets: saved recipes let you supply carton band and heavy band from the same machine.

Production Process

Raw material intake → mixing → pre-drying → melting and extrusion → water cooling and shaping → oven heating → first stretching → second stretching → embossing → oven tempering → cooling → automatic winding.

Typical Applications

Brick and block bundling, ceramic tile packs, aluminium ingot and metal coil bundling, heavy pallet loads, timber bundles and construction material packing.

Service and Support

We send strap samples from the same configuration before you commit, so you can test grip and strength on your own product. Installation guidance, operator training and spare parts support are included after shipment.

FAQ

Q: What is the widest band the line can make?
A: 25mm wide and up to 1.0mm thick in the standard configuration.

Q: Is the embossing really necessary for bricks?
A: It makes a visible difference: embossed band grips the pack instead of sliding when the load settles.

Q: Can I get samples before ordering?
A: Yes, we can supply strap samples produced with the quoted configuration.